Posted on

weed grow room temp and humidity

Weed grow room temp and humidity

Unfortunately, higher temperatures during the flowering stage can cause plant problems and slowed bud growth. It can also cause terpenes and potency to evaporate into the air.

Give plants colder temperatures at night, especially towards the end of the flowering stage

7 Essential Concepts About Temperature Control

If it’s too cold in your grow room, sometimes you have additional options besides just getting a heater, such as getting a stronger/hotter grow light or using extra insulation to contain the heat of the grow lights you do have.

Please note temps above 80°F (26°C) in the flowering stage will slow down bud growth and may cause them to become airy and loose. The heat can also reduce the potency and smell of your buds. Keeping the grow room temperature under control is especially important in the flowering/budding stage!

Temperature & Humidity Adjustment Cheat Sheet

Drying & Curing – Temperature is incredibly vital to the drying & curing process. A professional dry/cure is one of the most significant factors when it comes to producing top-shelf buds.

Weed grow room temp and humidity

Because cannabis cuttings root best in warm conditions with high humidity, the cheap trays with clear plastic domes work remarkably well. In cool conditions, a heat mat should be placed underneath the trays to maintain an optimum temperature of 74-78 degrees F. and relative humidity at 75-85%. No matter where and into what medium you plan to root your clones, keep warmth and high humidity on your priority list. Clones allowed to get cold or dry will perish quite quickly. Too much humidity (over 90%) can also cause mold and rot, so cut a quarter-sized hole or two in your clear plastic dome to allow some air movement and circulation.

In order to properly measure temperature and humidity, you’ll need a thermometer and hygrometer. Best to invest in a digital one that can give you current readouts as well as highs and lows when you’re not inside the room. To raise heat, you’ll need a heater and to lower heat, you’ll need an air conditioner. These can be outside or inside the growing space depending on the size of your space and how much the temps and moisture levels fluctuate. A humidifier and a dehumidifier can be employed to raise and lower humidity rates. Larger grow rooms can benefit from a controller that uses a sensor to keep track of temps and humidity and turns on the appropriate appliance to regulate and keep them within your set parameters.

Cloning

The drying room is a place that must be carefully monitored. Keep in mind that your plants will be giving off a large amount of moisture into the room as they dry. It’s important to pull wet air out and keep air circulating in the room without actually having fans blowing right on your hanging branches, which can dry them out prematurely resulting in a harsh taste and burn. Also, growers in dry places such as Colorado struggle to extend their drying time with humidifiers, while farmers in more humid climates such as Northern California use dehumidifiers to pull water from the air in order to avoid mold growing on their buds.

Garden temperature is a critical factor in photosynthesis and plant development.

The Vegetative Stage: Best Grow Room Temperature

Ideal grow room temperature and humidity varies depending on the stage of plant life. Cloning requires higher temperature and humidity than vegetative growth and flowering plants have different ideal atmospheric conditions as well. In order to master the art of marijuana growing, dialing in the proper environment at the right time remains the most essential ingredient for success. So, what is the best grow room temperature and humidity level?