Soaking Cannabis Seeds

ILGM

Buy Cannabis Seeds Online

thought i might try soaking for germination instead of paper towels. how long do you guys going this route let them soak before the soil? Seeds are expensive, having them all germinate is achievable with these easy germination techniques. You'll be growing in no time! Best way to germinate cannabis seeds!…

How long to soak seeds?

thought i might try soaking for germination instead of paper towels. how long do you guys going this route let them soak before the soil?

greenquartz
Well-Known Member
Jerry Garcia
Well-Known Member

thought i might try soaking for germination instead of paper towels. how long do you guys going this route let them soak before the soil?

Unless they are older seeds you don’t need to soak them in anything.

I just put mine in a moist cup of soil and let it do it’s thing. don’t make it harder than it is with paper towels and soaking!

Well-Known Member

well im new and just did mine but i let them soak till they craked then planted. I took water that set out for a couple days droped in seeds 2nd morning after they cracked

dukeofbaja
New Member

I used to do paper towels but tried soaking and like it. I usually just soak them for 24 hours in a warm dark place. After 24 hours, I check them. I tap them softly to see if they sink. If they do, I plant it in soil and it usually sprouts in a day or two. If the seeds don’t sink after 24 hours, I check again at 36 and 48 hours and do the same. If they have not sunk after 48 hours, I usually plant them anyway, but rarely do they grow.

BKCSG
Active Member

out of 200 quality seeds i’ve never had one that hasn’t germinated and i’ve always put them directly into the soil. I never even touch the seeds, i just tip the bag it came in and let it fall into the little hole in the soil i made. I’ve never understood why people soak or use the paper towel method. In my opinion, the more you handle the seed, the greater the chance of wrecking the seed. Plus, you risk hurting the tap root when you transplant. Just do it in the soil. its how she likes it ; )

dukeofbaja
New Member

So true BKCSG. I just stick seeds for my veggies into the soil and they seem to do well, I have never kept track of it though.

2beanklm
Active Member
BKCSG
Active Member

I put them right into the soil and they sprout 2 1/2 to 3 days later. From what some of you are saying is you soak the seed for 24 hours and then plant it and 2 days later it sprouts? what am I losing by going directly into soil exept the chance of fucking it up? The paper towel method and soaking are neat little tricks, but why chance it and for what? to me its not worth it even if it speeds the process by a day. Its an f’ing seed.. it needs moist soil and warmth, thats it.

siccmade420
Active Member

sorry but im gonna throw a question out there. you can stick a pot of soil with seeds planted in it and leave it in a warm dark place until they sprout?

Someguy15
Well-Known Member

I like soaking them til they sink (12-24 hrs) and then strait into root riot (rapid rooter, ect) cubes. I put them under the light so it’s slightly warm and they pop in 2 or less days.

Jerry Garcia
Well-Known Member

This plant is going to take months to grow. why do you need a head start?

out of 200 quality seeds i’ve never had one that hasn’t germinated and i’ve always put them directly into the soil. I never even touch the seeds, i just tip the bag it came in and let it fall into the little hole in the soil i made. I’ve never understood why people soak or use the paper towel method. In my opinion, the more you handle the seed, the greater the chance of wrecking the seed. Plus, you risk hurting the tap root when you transplant. Just do it in the soil. its how she likes it ; )

The only time soaking is really beneficial is when you’re using OLD, DRIED seeds. But even then, if you plant them directly in soil and water them in, they will probably absorb the same amount of water.

If you bought seeds from a reputable seedbank then you can assume they are fresh enough and will germinate fine. If you found some 8 year old seeds in your sock drawer then maybe soaking them for 24 hours wouldn’t be the worst idea.

See also  Buy Marijuana Seeds In Nevada

But really, if you let the taproot grow directly into the soil without handling it, you will VIRTUALLY ELIMINATE ALL stress and produce a healthier seedling.

Plus, IT’S MORE WORK!

Just put the seed 1/4 inch below the surface of the soil. 1/4 inch is pretty shallow. DON’T PLANT TOO DEEP. Just poke a hole, drop the seed and cover it up. Orientation doesn’t matter. gravity will tell the root which way to grow. Then fully saturate your medium and place by a light source. In a few days your seedling will sprout.

How to Germinate Cannabis Seeds

So you’ve gotten hold of some cannabis seeds and want to make sure they all pop? Seeds are expensive and having them all germinate is achievable, provided they were bred and stored correctly. There are various methods of germination that different cultivators will swear by, from pre soak solutions to the type of medium used.

General Requirements for Germination

Consider a seed falling off a tree in winter. By the time spring comes around the seed may be slightly covered in a light soil, temperatures have risen and rains are starting to fall. These are the basics conditions for a seed to germinate; warmth, water, air and some sort of darkness or cover.

The Seed Soak Germination

This is a part of germination where the seed is soaked for a period of time. Soaking can be in anything from distilled or RO water, to some form of special solution. Solutions can vary from beneficial microbial inoculation or a solution of hydrogen peroxide. The time a seed is soaked can vary from a few minutes to hours or even a day. The soft seed is then carefully transplanted to the growing medium of choice to sprout and grow. It should be noted that seeds can drown and we wouldn’t advise submerging seeds for more than 24 hours.

Hydrogen Peroxide Solution

Hydrogen peroxide is used to sterilize the outer shell of the seed and increase oxygen levels around it. Oxygen is important for gemination and is not uncommon for cultivators to rinse seeds in a weak solution for up to 30 minutes. Add 3ml of 50% hydrogen peroxide to 250ml of water for this method of soaking. Be sure to rinse the seeds well with clean water after soaking. Microbial life of all kinds won’t survive this method, whether it be unwanted fungi spores and bacteria or beneficial microbes.

Beneficial Microbe Solution

An alternative solution is dechlorinated water and beneficial microbes. The seed is then placed in the solution for anything from 30 minutes to a couple of hours. Beneficial organisms fight any “bad guys” around and coat the seed with “good guys.” The microbes will colonize the seedling’s root zone creating a symbiotic relationship between them. Rinsing with clean water afterwards is not necessary.

Paper Towel “Soak”

Many did it at school with paper towels or cotton wool. Seeds are placed in-between soft, water retaining materials in a warm place until a tap root is seen. Paper towels and cotton wool can dry out quickly so check on the moisture content regularly.

Once the tap root reveals itself, gently transfer it to a growing medium or starter plug. Place the sprouted seed tap root down and cover lightly. When transplanting seeds, minimize exposing the root to the elements especially sunlight. Sterilize all tools used and be sure not to break the tap root during transplant, as that can happen too.

Starter Plug Germination

Starter plugs range from rock wool to peat pellets and natural sponges of different kinds. What’s important to note is not to mix your mediums. For example, don’t germinate seeds in rock wool when planning a coco peat finish. A peat pellet or natural sponge would be better suited. For a sterile or inoculated plug to germinate in, add either peroxide or microbes to the water used to soak or expand with.

Rock Wool

An old favourite able to hold both air and water well. Produced by the heating of basalt rock and calcium and spun into a sheet. Rock wool naturally has a high pH of 8 and should be soaked in water with a pH of 5.5 – 6 for 30 minutes. Shake excess water off and place the seeds in the designated hole. Pinch the hole closed and place the rock wool in a warm area. Keep the rock wool plug moist but not overly soaked.

Peat Pellet

Popular in recent years the coco peat pellet is expanded with water and surrounded by a soft material with an opening at the top. It’s pH is naturally around 5.5 but any water or solution used to expand the pellet should also be 5.5. Place the seed gently 1cm to 5mm inside the pellet and cover lightly. Make sure the pellet stays moist but not soaked, allowing for water to drain off.

See also  What Are Feminized Cannabis Seeds

Natural Sponges

A sponge shaped like rock wool but made from organic materials like coco peat. When produced, they are pH ready at around 5.5 and in some cases when sold in packs, are already sufficiently soaked too. Like above, place the seed gently inside and place in a warm area making sure they stay moist.

Direct Sowing Germination

You may want to sow your seed directly in the ground in the garden. For that, choose the sunniest spot with a bit of space around as cannabis can get big outdoors. You can soak your seed like above or just get it in there by placing it 5mm – 1cm deep in loosened soil. Keep the area moist and protected, even covered with something clear if preferred.

Cannabis plants become sexually mature and ready to flower from around 6-8 weeks strain depending. This allows for seeds to be planted from spring though to mid-late summer, the longer you wait though, the smaller the yield. Plant your seed in mid spring for vigorous growth during the summer months and a big harvest come autumn.

Conclusion

These are a few of the basic methods used to germinate cannabis seeds although the options are endless. Each method will vary in the time it takes for the seed to break ground, anything from a day or two, to two weeks outdoors with direct sowing. Starting off in the same fashion as vegetable seeds in seed trays are also options for germinating cannabis seeds.

Here are a few more tips for germinating cannabis seed:

If using a propagation dome or some sort of closed environment to increase humidity, the air should be changed daily.

The use of heat mats can greatly increase germination rates, the right temperature can make all the difference.

How to Germinate Cannabis Seeds

For many growers, purchasing cannabis seeds is no less than children getting candies. The excitement is palpable, and you’re ready to try every trick in the book to make sure that everything works according to plan. However, Mother Nature is unpredictable and the seeds you sowed with care may not germinate at all. If that has frustrated you and you want to learn how to germinate cannabis seeds, here are a few pointers that can steer you in the right direction.

Best way to germinate cannabis seeds

There are many ways to germinate cannabis seeds, but we will get straight to the best method. This technique has worked almost every single time for us. Of course, no matter how hard you try, you cannot expect 100% germination at all times because some seeds may be old or just not viable. However, you can rest assured that this one’s better than the others.

Step 1 – Choose the best seeds

Take a look at all the seeds in your stash. While some will be super hard, some might be soft and disintegrate as soon as you press them. This is another reason why you must purchase seeds only from reputed companies. At Fastbuds , all seeds are checked rigorously and then sent across different locations. Once you inspect the seeds, choose strong ones that are hard to the touch.

Step 2 – Get rubbing!

This is a step that will help the seeds germinate so fast you’ll find it unbelievable. Generally, most cannabis seeds require at least 4-5 days to sprout, but by doing this you’ll make sure that the process speeds up by at least 2 days.

So, all you need is a hard and scratchy surface like, say, sand paper. You can also opt for a nail file. Then, pick your seeds one by one and rub the tips once or twice on the sand paper. Remember that it has to be light and swift because if you press too much you might destroy the seeds way before you even soak them in water!

Step 3 – Soak seeds in water

After a quick rub, immerse the seeds in a glass of clean water. They won’t sink immediately, but after 10-12 hours a light touch will send them down. Let the seeds remain in the water for at least 24 hours. Do not soak them for more than 48 hours or you risk ruining them completely.

Step 4 – Get paper towels

After 24 hours have passed, you’ll see that the seeds have split a bit. It’s not going to be easily visible, but if you look closely you will see a slight crack and the white interior of the seed inside. At this point, get a few paper towels, and place the seeds in them. Wrap the seeds lightly and sprinkle some water on the towels.

See also  Hybrid Weed Seeds

Note that you cannot overdo this step. Meaning the towels have to be moist – neither too wet nor too dry. Place the towels in a ziplock bag or anything that’s airtight. This is important since placing the towels in an open area will make them dry out faster and the seeds will not be viable anymore. Next, place the airtight container in a dry area. Now, you’ve done everything you can, and it all depends on time and the seeds after this stage.

Step 5 – Check the seeds

Generally, it’s best to wait for at least 4-5 days for the seeds to sprout, but since the seeds were rubbed on a hard surface earlier, they may sprout in just 2-3 days. After a couple days have passed, you can check on the seeds. If they haven’t sprouted, place them back in the bag. Sometimes, you’ll see half of the seeds sprouting while the remaining look dull. Simply select the sprouted ones and leave the remaining in the bag.

Step 6 – Get the container ready

This is something you need to do before taking the seeds out because you cannot let them dry out. Grab a container of your choice and fill it with a good potting mix. Use containers that have ample holes at the bottom or use fabric pots that let the water drain out completely. A mix of coco coir + gardening soil + perlite in a 40-40-20 proportion seems to work well for cannabis plants.

Also, if you’re growing photoperiod plants, you may shift the seeds to small cups with soil and then transplant them later. But, if you’re using autoflowering seeds, it’s best to plant them in their final containers so you don’t have the headache of transplanting them later.

If the seeds have sprouted with the taproot clearly visible, plant them immediately in the soil. To do this, poke a small hole about an inch deep with your finger and place the seed in it. Do not sow more than one seed per hole. Remember not to push the seeds too deep into the soil or they will have issues breaking out.

Step 7 – Water

Once you’ve covered the seeds with some light soil, sprinkle water on the seeds. Remember not to pour the water too quickly or the seeds will dislodge themselves. If you don’t have a sprinkler, grab a coke bottle and poke holes on the cap to use it in a pinch. This works nicely as a sprinkler and isn’t too hard on the seeds.

If you see any of the seeds poking out after watering them, simply cover them with soil again. It’s important for the seeds to NOT be exposed to sunlight. At the same time, you must ensure that the soil isn’t bone dry or dripping wet. It must be moist – just like you did this with the paper towels.

Maintaining enough moisture in the soil is critical. In some locations, the soil may dry out faster due to the climate. In such cases, watch the pots every 5-6 hours and pour water if they are too dry. If you’ve poured too much water, a good container will help drain out all the excess.

Step 8 – Seeds sprout

If you’ve done everything right, you will see the seeds break out of the surface of the soil. AT first, you’ll only see the cotyledons. At times, the seeds cannot break out of the hull and remain stuck in there. Although they break out of the hull by themselves in a couple of days, you can help them by sprinkling some water on the hull gently. Remove the hull as slowly as you can.

Step 9 – Maintain the seedlings

After the seeds sprout and you see the cotyledon, let the seedlings remain in dull light for a day until they adjust to the light around. For indoor growers, using CFLs will help. If you’re growing outdoors, you can cut the top of a coke plastic bottle and place it on top of the seedlings to prevent harsh sunlight. Make sure you do this only for a day or two and the seedlings will adjust to the environment.

It’s important to water the seedlings regularly during the first week. Again, remember that the soil cannot be too wet or dry. Maintain the perfect amount of moisture and your seedlings will reward you with big buds later!

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.