Posted on

lst cannabis grow

Lst cannabis grow

A young vegetative cannabis plant

Soft wire ties (optional) – only get these if you're going to grow very large plants; they're overkill for small plants

Step 1: Top your young plant when it's got 4-6 nodes.

Always bending the tallest stems down results in plants with a flat canopy

You're ready to start flowering when…

Lst cannabis grow

With this method, you’ll install a trellis or “scrog net” across the entire canopy. You’ll use the holes in the framework to separate your plant’s branches, keeping them apart so the light can get between the colas.

If you’re using LST techniques on your indoor plants, you’ll need to create holes in the sides of your pots to allow you to insert the strings and pull down the branch. If you’re growing outdoors, you’ll need to attach the line to a stake and drive it into the ground.

A Screen of Green (SCROG Nets)

Many growers that super crop their plants for the first time freak out when the branch droops lifelessly towards the floor. Relax! This situation is a normal occurrence. The bruising of the branch takes its toll, but the plant bounces back very quickly. In a day or two, you’ll hardly notice any difference in the plant’s health.

When do I start LST with my cannabis plants?

The goal for LST techniques is to train your plant without placing any stress on it. Stressing your plant causes slowdowns in growth, reducing the size and potential yield of the plant.

Lst cannabis grow

The LST process is a relatively simple way to get the most out of your marijuana garden. You only need minimal equipment and can begin when plants are a few weeks into the vegetative stage. Make sure you don’t use anything sharp to tie down the stems. Otherwise, you risk causing damage to your plants. However, if you accidentally snap a stem, don’t panic! There is every chance that some duct tape and patience will help heal the plant.

The growth of your plants depends on auxin, a hormone. Your cannabis plants’ auxin is mainly focused at the top of the plant. As a result, most of the growth concentrates on the central stalk. When you utilize LST, however, you eliminate this focal point and provide a base for a level canopy and multiple colas. The consequence of this is more bud per plant!

The LST method consists of bending the plant as it grows. You tie down branches that are becoming too long. Once you pull the plant downward to form an ‘L’ shape, you ensure more evenly distributed auxin. As for where you draw the branches to, your best bet is to drill a few holes around your growing container’s rim. This practice makes it easy to put the ties through the holes and around the branches.

When performing LST, you need to maintain a flat canopy where all branches are at the same level. Make sure you bend the shoots outward and away from the main stem. At some point, you may snap a branch as you bend it. This is where the duct tape comes in! It isn’t a catastrophe as long as the limb doesn’t come off completely. Even a snapped branch can heal in a week or so.

Best Cannabis Strains for Low-Stress Training

LST and HST are different methods of helping change the chemical balances in the plants. The primary difference is that low-stress training doesn’t directly damage the plant, whereas high-stress training does. If you leave your marijuana plants to grow freely, they will produce a single main cola. It will grow as tall as possible and looks fantastic but doesn’t help increase your crop’s yield or the quality of the herb.

If you cultivate your weed indoors like most residential growers, you must prevent the light from getting too close to the top cola. As a result, the buds that grow on the lower parts of the plant miss out. When you train your plants via LST, you provide the opportunity for more ‘even’ canopies to grow.

When picking the stem you wish to bend, make sure you analyze it first to ensure it is flexible. If you suspect the stem could break, look for an alternative. Next, consider the type of shape you want your plant to grow in. For beginners, it is best if you stick with a basic ‘bush’ form. If you have pre-drilled holes in your container, you can easily tie the stem inside them.

Pros & Cons of LST

Also, don’t assume that you can only perform low-stress training on indoor plants. If you cultivate outdoors in a colder climate, LST can help boost yield during the summer season. It is also a technique that keeps your plants at a reasonable height. This is useful if you don’t want the world to know about your outdoor grow.

You will find that the branches start growing around 24 hours after bending. However, it begins at the same level as the rest. When the secondary branches get more light and begin to grow, you will have to use LST on them as well.