Posted on

how to make a marijuana grow room

Remember, a common mistake newbie growers make is to overwater plants.

Inevitably, there will be fluctuations of temperature and humidity in your cannabis garden. These fluctuations can occur both throughout a grow space as well as within pockets inside a given room. They can also occur at different points within a given day or throughout a season as conditions change in the environment outside your grow space.

Even in legal states, you may want to conceal your crop from judgmental neighbors and definitely from potential thieves. Growing indoors allows you to grow discreetly behind a locked door.

For example, it takes less time to grow 3′ weed plants than 5′ plants; in the span of a year, you can maybe grow four harvests of 3′ plants, or two harvests of 5′ plants.

Watering and nutrients

Fluorescent light fixtures, particularly those using high-output T5 bulbs, are quite popular with small-scale cannabis growers because:

Every space is different and there will be a learning curve to growing in yours.

This is easily achieved by placing an exhaust fan near the top of the space to suck out warm air—warm air rises—and adding a port or passive fan on the opposite side of the space near the floor to bring in cool air. A complete air exchange throughout the entire grow space should occur once every minute or so.

Regulating temperature

Below is a list of things to consider and equipment you will need to purchase to get started growing marijuana indoors.

Most dehumidifiers and ACs have built-in thermostats, but if they don’t, you’ll want to buy an external one.

How to make a marijuana grow room

When it comes to growing cannabis indoors, setting up an entire grow room can be a bit more complicated and costly than a simple grow tent.

If you have an inline fan it’s not that hard to attach the ducting, the difference is the size of the intake fan, which is usually smaller than the extractor. You can also do this using clamps to make it easier.

Although you have a ventilation system, you’ll still need a way to move air around your room. We recommend using standing fans or clip-on fans on the wall if you have the space, although the choice is yours. You’ll need to place them strategically in order to help distribute any new air you’re taking in so that you don’t end up with stagnant air pockets. Cannabis plants need constant fresh air to survive.

Extractors can be noisy and cause vibrations that can travel through the wall and floor, which can be heard from other rooms and floors. You’ll need to use a soundproofed box in order to avoid this. It’ll have to be attached to the ceiling, and you can use a frame designed for this purpose or a chain system using rubber rings which stop vibrations from travelling up through the ceiling.

Humidifier

The amount of lights and their wattage has a direct impact on the strength of your extraction fan and inline fan.

If you clean your room thoroughly before you start growing, you’ll be able to keep insect and fungi infestations at bay for much longer, which is incredibly important – if your indoor grow room becomes infected it can be quite hard to get rid of it for your next grow.

When growing in a wide open area such as a grow room, you’ll need to know how many grow lights you’re planning on using. In this case, we’re going to use two 600w HPS grow lights in a 2 x 2 x 2.2m room. If you want to follow this method, you can also use three 315w LEC lights for similar results.

How to Build a Grow Room | Connecting your Aluminum Ducting

Once you have your extraction system, intake and filtering system installed and you’ve covered the walls in reflective sheeting, it’s time to start installing your lighting kit.

Once you’ve covered the room with reflective sheeting, you’ll need to prepare your air intake and extraction system. First, make sure nothing can be seen from outside your apartment through the window.

How to make a marijuana grow room

“Wet trimming” involves trimming as soon as plants are ripe. Remove individual branches and proceed to use sharp scissors or shears to precisely trim excess plant matter. As soon as the plants are cut down, the drying process begins. What’s immediately noticeable is how sticky and wet the buds are. While this is an excellent indicator of potential quality, it’s also a breeding ground for contaminants. Buds left in this state will almost certainly be ruined so it is best to act quickly to begin a controlled drying process.

That said, we are not experts in growing specifics or in the design of custom-growing spaces.

As the number and size of dispensaries grow, so do consumer expectations of the quality of marijuana products and the availability of diverse and unique brands. As in the wine industry, premier brand names can command a price ten or more times that of an average product.

Curation

To get started, you’ll want to buy a hygrometer and a thermometer. With these tools, you can accurately monitor and then alter humidity and temperature conditions in an attempt to strive for repeatable quality levels time and time again.

Widely regarded as the preferred method, “wet trimming” offers the most control and quality assurance. It also has the added benefit of allowing you to collect the “sugar leaves” which contain lower cannabinoid levels and can be stored separately to be processed into edibles at a later time. Remember that “High THC; low Cannabinoid level oil” states list from before? This is where that product comes from.

What are the most important points of growing a consistent crop to build your brand? Again, borrowing from the winemaker’s metaphor, it’s all about what you’re growing, where you’re growing it and the conditions it’s grown under. Below, we’ll look at how to create the best growing environment, with a focus on humidity and temperature controls .

Find the Best Air Cleaner for Your Grow Room

On top of the need for specific temperature and humidity controls throughout the growing process, it’s worth mentioning that humidity level during the drying process is equally important to the quality of the final product.

The curing process breaks down chlorophyll remaining in the plant, resulting in a less-harsh taste. Remember: harsh buds are not quality buds. These procedures can enhance the shelf-life of a crop, which is highly important with a product like cannabis that isn’t afforded the addition of preservatives.